ccna for security

ccna for security.S1 (config)#interface port-channel 1 To create a port channel. specify a unique channel group number. the range of the group number is 1.6. the group number has only local meaning. The no interface port-channel 1 command is used when the EtherChannel is cancelledS1 (config)#interface range fastEthernetO/13 -14S1 (config-if-range)#channel-group 1 mode on Divide the physical ports into port channels and specify the port channels by manual configurationSI (config-if-range)#switchport trunk encapsulation dotlq S1 (config-if-range)#switchportmode trunk S1 (config-if-range)#exit The trunk configuration of the physical port will The trunk configuration of the physical port will be inherited to port-channel 1 from the beginning S1 (config)#port-channel load-balance dst-ip Configure the load balancing method of the port channel, the load balancing methods are dst-ip, dst-mac, src-dst-ip>src-dst-mac, src ip, src-mac, and by default, the source MAC address-based load balancing method is used.Configuring the Switch S2O W-" "'1S2(config)#interface port-channel 1 The port channel group number can be different at each end of the link S2(config-if)#exit S2(config)#interface range fastEthernetO/13 -14 S2(config-if^range )#channel-group 1 modeon S2(config-if-range)#switchporttrunk encapsulation dotlq S2(config-if-range)#switchportmode trunk S2(config)#port- channel load-balance dst-ip(2) Verify manual configuration EtherChannel Sl#show etherchannel summary to view EtherChannel summary information Flags: D -down P -bundled in port-channel I -stand-alone s -suspended H-Hot -standby(LACPonly)R-Layer3S-Layer2U-inusef-failedtoallocateaggregatorM-notinuse, minimum links not met u -unsuitable fbr bundling w -waiting to be aggregated d -default port Number ofchannel-groups in use: 1 Number of channel-groups in use Numberofaggregators: 1 number of aggregators