new ccna v7

new ccna v7.It should be known that you only need to be proficient in port configuration. In order to do this, the following tasks need to be completed. Step 1 Create a VLAN on the switch. step 2 Assign a port to the created VLAN. Step 3 Save this configuration. Step 4 Configure trunk ports where neededUsing the standard topology in Figure 9-11, the first step is to create the VLANs that will be used. in this figure, VLAN 10 and VLAN 20 are used. then assign a VLAN to a switch interface or configure a suitable interface as a trunk interface. You should9.2 Basic Topics 119This starts with VLAN configuration.1. creating VLANsOn most switch platforms, VLANs are identified by the number 1.4094. 1.1001 VLANs are stored in the VLAN database. VLANs of 1002.1005 are reserved for token ring and FDDI VLANs and are created by default and cannot be removed. VLANs larger than 1005 are considered extended range VLANs and are not stored in the VLAN database.The following guidelines are followed when defining VLANs.The switch supports 1005VLANO in VTP client, server, and transparent modeNote: VTP is a VLANTrunk protocol designed to keep VLANs consistent across the network. This topic is beyond the scope of this book, so it will not be discussed further.The normal range of VLANs is identified by a number within 1 ~ 1001. VLAN 1002.1005 is reserved for token ring networks and FDDIVLANs.