ccna 200-301 exam fees in india

ccna 200-301 exam fees in india.If there is a set of ports on a generic adapter inserted into one of the slots of the router, such as in the 7500, 7200, 3600, and 2600 model modular routers, the following reference takes the form of specifying a particular serial port.interface serial slot#/port#In addition to the serial port, other ports including Ethernet, Fast Ethernet, and Token Ring are specified in a similar manner. Run Dynamips' CCNA emulation racks; henceforth, unless otherwise noted, references to racks are to Dynamips' racks. Turn on router R1,then execute ^telnet R1. log in to the console of R1 and use the "showip interface brier command in privileged mode to display the currently active or inactive network interfaces on the router, as shown in Figure 4-2-1.Figure 4-2-1 shows all network interfaces on the router In some devices, multiple ports can exist on 1 port adapter card, and multiple port adapter cards can be installed in 1 slot, thus changing the format of the above references. In this case, the following command format would be used to reference a specific serial port.interface serial slot#/port-adapter#/port# Recall that in Figure 4-1-2, the router's interface has FastEthemet 0/0 and Serial0/0/0 representations.4.2.2 The Router's Boot ProcessWhen the router is powered on, it performs four main steps: performing POST, loading the Bootstrap program, locating and loading the IOS, locating and loading the boot configuration file or entering Setup mode. A flowchart of the main functions performed during router initialization is shown in Figure 4-2-2.Power-up Self-Test Self-Boot Loader1 is the bit configuration file \ :find the print crutch into Setup mode| 1 findInitialize" by loading the configuration file