ccna 200 301 syllabus of errors democracy meaning

ccna 200 301 syllabus of errors democracy meaning.unequal distances. If unequal relays are used, this is EIGRP non-equal load balancing, as will be demonstrated in the advanced configuration of EIGRP. R1 going to 2.0.0.0/8 shows U1successors,,,i.e. only one best path..FD(FeasibleDistance,FeasibleDistance): this is the best path to the remote network that has the smallest metric that will appear in the routing table. Feasible distance is the sum of the reported distance of the next-hop router and the distance from this router to the next-hop router. There are two paths from R1 to 2.0.0.0/8 with distances 2297856 and 156160, and the smallest distance 156160 becomes the feasible distance, which is the distance from the Fast Ethernet interface to R2 and then to the destination.. Route Source: is the identification number of the router that originally published this route. This field is only populated if the route was learned from another E1GRP router, e.g. 2.0.0.0/8 was learned via 12.1.1.2 (via 12.1.1.2) or 21.1.1.2 (via 21.1.1.2).RD (Reported Distance): is the distance to a given destination network as reported by the neighboring router. There are two paths from R1 to 2.0.0.0/8, one is through the serial interface to R2 and then to the destination, and the other is through the Fast Ethernet interface to R2 and then to the destination. Regardless of which path is taken, the reported distance for R2 is 128256,plus the metric for R2's different interfaces, which finally yields the feasible distance from the different paths, with the smallest feasible distance going into the routing table.. Interface information: which interface of this router can be used to reach the target network.7.1.5 EIGRP Metric Calculation**EIGRP uses a composite metric to calculate the optimal path to the destination network. The composite metric can be a combination of bandwidth, delay, reliability, and load, although the MTU (Maximum Transmission Unit,______________________________________________________________ maximumTransmission Unit) is also included in the routing update, it is not used to calculate the metric values for IGRP and EIGRP. In the case where KI, K2, K3, K4, and X5 are not 0, the EIGRP metric is calculated by the formula213 A