ccna 200-301 pdf arabic

ccna 200-301 pdf arabic.interface-name\command] command to assign commands to the selected view. Step 5 Enter the exit command to exit view configuration mode.2.2.2.4 Configuring Role-Based CLI SuperviewsConfiguring a super view is basically the same as configuring a CLI view, with the difference that the super attempt is to assign commands using the view vieyv-name command. The administrator must configure the superview in the root view. To confirm that the root view is being used, you can use the enable view or enable view root command. At the prompt, enter the secret password.To create and manage a super view, there are 4 steps. Step 1 Use the parser view view-name superview command to create a superview and enter superview configuration mode. Step 2 Use the secret encrypted-password command to assign a secret password to the view. Step 3 Use the view view-name command in view configuration mode to assign the view that already exists.2.2 Assigning Administrative Roles 39 Step 4 Enter the exit command to exit superview configuration mode. Multiple views can be assigned to a super view, and views can also be shared among super views. To enter a view that you already have, enter enable view view-name and the corresponding password in user mode. Use the same command to switch from one view to another.2.2.2.5 Verifying Role-Based CLI ViewsYou can use the enableview command to verify a view. Enter the name of the view to be verified and the password to log in to the attempt. Use the "?" command to verify that the commands available in the view are correct. In the root view, use the showparser view all command to view a summary of all views.2.3 Monitoring and Managing Devices2.3.1 Protecting Cisco IOS Images and Profiles2.3.1.1 Cisco IOS Resilient Configuration Features